ELASTOMERIC CONCRETE AND SCREED

RiteCrete PPC

RiteCrete PPC Crete is a polyester polymer based elastomeric concrete and patching material. RiteCrete PPC is designed for durable, fast setting concrete repair applications. It is an excellent patching material and an energy absorbing elastomeric concrete nosing for expansion joints. It achieves over 3500 psi in compressive strength and 800 psi in tensile strength within 24 hours. Designed for rapid strength gain and easy application, which allows us to re-establish traffic safely within 1.5 to 2 hours at temperatures down to 50F. RiteCrete PPC conforms to the Specification AASHTO T-34 Elastomeric Concrete nosing for expansion joint.

RiteCrete-881

RiteCrete-881 is suited for a wide variety of concrete repairs for Bridges, Decks, Parking Garages, Airport Runways, Pavements, Warehouse Floors, Waste Water Treatment Plants etc. RiteCrete-881 is a 100% solids; three-component, high strength, non-shrink epoxy. This fast setting product was developed for a wide variety of concrete repairs. It is an excellent patching material and an energy absorbing elastomeric concrete nosing for expansion joints. RiteCrete-881 offers superior resistance to de-icing salts, petroleum products, chemicals, freeze/thaw cycles and constant abrasion. Meets ASTM-881 Type III standard.

RiteCrete LV

RiteCrete LV resins are a superior blend of low molecular weight epoxy resin and reactive dilutents, designed to produce an easy-flowing reliable system with low drip and no blush. RiteCrete LV Epoxy Resin is typically used at room temperatures using your choice of RiteCrete LV hardeners (Fast, Medium and Slow) in a 2:1 mix ratio of resin and hardener. RiteCrete LV Epoxy Resin can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. This resin boasts a 600 cps viscosity for smooth, easy wet-out of fiberglass laminations. The reduced viscosity of RiteCrete LV Epoxy Resin provides for complete wet out of fiber reinforced fabrics and reduces the potential for voids and other imperfections. RiteCrete LV Epoxy Resin is formulated from 100% low molecular weight reactive solids for excellent moisture exclusion and displays less than 1% shrinkage when cured.

APPLICATIONS

• Concrete repairs in bridge decks
• Parking garages and Pavements
• Expansion joint edge material replacing the blockout area
• Flexible nosing for metallic expansion joint assemblies
• Airport runways
• Warehouse Floors
• Wastewater treatment plants and industrial plants Grouts for anchoring equipment

APPLICATIONS

• A patching compound for spalls in concrete
• Ideal for new construction and rehabilitation projects
• Parking garages and Pavements
• Expansion joint edge material replacing the
blockout area
• Flexible nosing for metallic expansion joint assemblies
• Airport runways

APPLICATIONS

• For boat hauls and structures
• Laminating and bonding of nearly all materials

FEATURES

• Excellent bond strength to concrete and steel

• Can accept traffic within 1.5 to 2 hours at  temperatures down to 50F
• Non-brittle over extreme temperature
• Chemical resistant
• Permanent and long-term repair solution  • Energy absorbing concrete nosing for      expansion joints

FEATURES

• Grout for equipment bases and anchoring • Rapid Setting - 30 minutes cure time at room temperature
• High early strength open to traffic
• Superior resistance to de-icing salts, petroleum products, chemicals and constant abrasion

FEATURES

• Low Viscosity
• Low drip and no blush
• Excellent moisture exclusion
• 1% shrinkage when cured

bridge elastomeric concrete
bridge elastomeric concrete
press to zoom
surface preperation for elastomeric
surface preperation for elastomeric
press to zoom
preperation for elastomeric concrete
preperation for elastomeric concrete
press to zoom
poaring elastomeric concrete
poaring elastomeric concrete
press to zoom
1/1